0BH 325 201 C (probably >> 0GC 325 201 E, 0GC 325 201 H)

The cover has 2 screw studs welded on the outside of the bottom of the cover.

The moulded rubber gasket is firmly bonded to the cover. Aftermarket gasket is available with our part number B-MCG-DQ500/381.

The gearbox manufacturer supplies this part with a firmly bonded gasket. Unfortunately, individual gaskets for repair are not available from the gearbox manufacturer.

At the request of our customers, we therefore offer an aftermarket gasket. However, we do not guarantee the function of this gasket.

Please only use the gasket if

- you have removed the old gasket without leaving any residue and
- You have the correct glue available

Make sure that the adhesive is applied to the entire surface and that the gasket is pressed on and that the adhesive dries properly.

Pay particular attention to weak points in the gasket so that they are not damaged during installation.
a

This item has been replaced by the factory. Our used part may correspond to an old or a new part number. Please check if you need a specific part-number and inform us with your order.

You can find detailed information on the different versions in our web catalog for this article under the heading "Documents (Technical Informations)"

Various executions of this part are available for these transmissions

PLEASE CHECK CAREFULLY BEFORE INSTALLATION. WE WILL NOT TAKE RESPONSIBILITY FOR DAMAGES RESULTING FROM THE INSTALLATION OF A WRONG SPARE PART/COMPONENT.

The distinguishing features known to us to this day are stored for each article.

used part - quality: no or just slight signs of use, item might be useable as it is - can be ordered only if in stock - subject to prior sale.

If bearings, bushings, seals, gaskets and washers are supplied they are free of charge as they may have to be replaced - missing or damaged items of this kind will not be replaced by us.

All used parts are delivered without warranty.


housing

1

0BH, DQ500