The cover has no screw studs welded on the outside of the bottom of the cover.
The moulded rubber gasket is firmly bonded to the cover. Aftermarket gasket is available with our part number B-MCG-DQ500/381.
The gearbox manufacturer supplies this part with a firmly bonded gasket. Unfortunately, individual gaskets for repair are not available from the gearbox manufacturer.
At the request of our customers, we therefore offer an aftermarket gasket. However, we do not guarantee the function of this gasket.
Please only use the gasket if
- you have removed the old gasket without leaving any residue and
- You have the correct glue available
Make sure that the adhesive is applied to the entire surface and that the gasket is pressed on and that the adhesive dries properly.
Pay particular attention to weak points in the gasket so that they are not damaged during installation.
a
You can find detailed information on the different versions in our web catalog for this article under the heading "Documents (Technical Informations)"
Various executions of this part are available for these transmissions
PLEASE CHECK CAREFULLY BEFORE INSTALLATION. WE WILL NOT TAKE RESPONSIBILITY FOR DAMAGES RESULTING FROM THE INSTALLATION OF A WRONG SPARE PART/COMPONENT.
The distinguishing features known to us to this day are stored for each article.